General info about pumps and control panels
We offer a wide range of high quality pumps. KLEEpump is our brand of cost-effective submersible, drainage and construction pumps. From Italian manufacturer Dreno, we offer grinder pumps, etc.
What is a pump?
You probably know this, but there are different types of pumps, from small ones for use in basements to drain water from flooding to big stationary pumps that dewater and dehumidify large buildings and constructions.
Where are pumps used?
Pumps are used for many different purposes. In our KLEEpump range we focus on drainage and dewatering pumps of the highest quality.
KLEEpump KSP
KLEEpump KSP is a small, efficient and cost-effective construction and drainage pump in high quality. For construction sites or in basements and gardens to prevent floodings. The polyurethane vortex impeller ensures good resistance against sand and gravel. The stirrer in the pump housing ensures a consistent viscosity and minimizes risk of shutdown as a result of clogging.
KSP is supplied with 1x230V or 3 x400V and with various types of automation.
KLEEpump VP
KLEEpump VP is an efficient drainage and dewatering pump in high quality. The vortex impeller ensures a good free passage of solids that makes it suitable for many applications.
KLEEpump VPS
KLEEpump VPS is an efficient drainage and dewatering pump in high quality made from stainless steel AISI316. Handle in AISI304. The vortex impeller ensures a good free passage of solids which makes it suitable for many applications.
Material: Stainless steel
Available in 1- and 3-phase with or without automatic. Hmax. 31 m, Qmax. 78 m3/h. Output 0.4 – 5.5kW.
Dreno pumps Series V – Black water
Dreno type V of vortex pumps for black water.
Detached Power Wheel is suited for wastewater with very nondescript solids.
Good self-cleaning properties and thus less downtime.
4 pole pumps optimizes the life and capacity, and should be selected by limited lifting heights.
With seal leak detector.
Up to 7,5 kW in Atex-version.
Dreno pumps Grix – with cutter
Dreno GRINDER pump type GRIX. Grinder pump with knife system. Wastewater pump for smaller installations, e.g. homes, holiday homes, smaller industry, etc. Output 0.9 – 1.4 kW. 1- and 3-phase with or without automatic.
Dreno pumps series G2/GX – Grinder
Dreno Grinder pump type G (M/T) professional. Suitable for harsh environments, including industry and agriculture.
With strong blade system for uniform dry material and power to cope with higher lifts. With leak detector. Up to 7.5 kW in Atex version.
Dreno Kappa Pumps
Dreno Kappa pumps for water containing abrasive particles of sand, clay, chips, etc. which occurs on rocky surfaces.
0.4 – 9.2 kW. Flow up to 165 m3/h. Hmax. 42 m.
Dreno Compatta pumps
Thanks to its compact size, the Dreno Compatta series is ideal for pumping waste water from e.g. smaller homes. The main components are made of cast iron GG20. In the standard configuration, a lip seal is fitted on the motor side and a mechanical shaft seal on the impeller side.
Dreno Alpha V series
Dreno DNA
Dreno Pumps Series A
Dreno series A are channel pumps suited for gray water.
Long operation time. For solid particles.
4 pole pumps optimizes the life capacity, and should be selected by limiting lifting heights.
Hmax. 60 m, Qmax. 520 m3/h.
0.8 – 60 kW.
With leak detector.
Up to 7,5 kW in Atex-version.
Control panels for pumps
Control panel for 1 or 2 pumps.
One control panel for pumps from 0,37 kW up to 15 kW.
For control with level switch or pressure transmitter (4-20mA).
Electronic motor protection.
Protection degree IP55
Easy setup.
Options: GSM modul, Timer etc.
Need help?
If you do not find the right pump for your needs here on the pages, or if you need guidance, then you are welcome to contact us.